2 Port USB Socket 3.1A Input: DC12V/24V Output: DC5V 3.1A

2 Port USB Socket 3.1A Input: DC12V/24V Output: DC5V 3.1A

Want to add USB to any dash panel or surface? This unit will do just that for you and illuminates with four blue leds inside.

HEAR FROM OUR SHOP

“To install, remove the lower B pillars and front thresholds, then run wire across from the driver’s side to the passenger’s long enough to go up into the B pillar. Do that for both sides. Then, run a wire from the driver’s side to under the dash. Next, you do the grounding at the B pillar, then go 6 1/2 in. down from the top of the bottom B pillar trim and make a hole in the center. Lastly, put the USB in from the front, make the connection and put everything you removed back together.”  — Steve